Firmware SM-J330G — Samsung Galaxy J3 Pro

Please find direct download link of firmware version J330GDXS3BRI2 for the device Samsung Galaxy J3 Pro, model SM-J330G below.

Samsung Galaxy J3 Pro, SM-J330G
  • PDA/AP Version  J330GDXS3BRI2
    CSC Version  J330GTNX3BRG3
    MODEM/CP Version J330GDXU3BRI3
    Region  TNX — New Zealand
    Build Date 2018-09-07
    Changelist 13843239
    OS Oreo
    OS Version 8.0.0

     

        1.95GB


 

Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)

Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
     Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.

4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.